PCM Packs
(Phase Change Material)
The PCM pack – fillable with various phase change materials with melting points in the plus and minus range.
Year-round pack-out with PCM 5
The PCM 5 pack emits or absorbs heat or cold at about 5°C. In this way, the goods to be shipped can be kept at a constant temperature of between +2 and +8°C, both in summer and winter.
Ambient: PCM 18 & 22
Demanding temperature ranges can often hardly be displayed with purely water-based packs. Especially for the +15 to +25°C range, our PCMs with a melting range around 18 or 22°C are suitable.
No hazardous material
The PCM -21 with a melting point at -21°C is a safe alternative to dry ice. It is much safer to handle and, in contrast to the disposable dry ice version, can be reused.
PCM Packs without chamfers
PCM -21
Melting point at about -21°C
PCM 5
Melting point at about 5°C
PCM 18
Melting point at about 18°C
PCM 22
Melting point at about 22°C
PCM packs with chamfer
PCM -21
Melting point at about -21°C
PCM 5
Melting point at about 5°C
PCM 18
Melting point at about 18°C
PCM 22
Melting point at about 22°C
Chamfers for an optimized packing process
The PCM packs with chamfered edges can be placed on top of each other in a non-slip and precise fit. This allows a simplified packing process and prevents a loss of cooling capacity by reducing gaps between the cooling elements.
PCM Packs without chamfers
The cold pack with phase-change material can cover different temperature ranges depending on the selected filling. This enables the PCM cooling element to compensate for fluctuating outside temperatures and to keep the transported goods always within the intended temperature range.
Size: 280 x 190 x 26 mm
Weight: 960 g (PCM -21: 1410 g)
- durable hard shell
- Filling with phase change material
- different melting points available
- Frozen: no dangerous goods
- THERMOCON standard pack
- individual temperature ranges possible
PCM packs with chamfer
The PCM pack with chamfer has the same high performance filling of phase change material, but has chamfered edges. These allow the cooling elements to be angled into each other during the packing process.
Size: 266 x 266 x 26 mm
Weight: 1160 g (PCM -21: 1640 g)
- durable hard shell
- Filling with phase change material
- different melting points available
- Frozen: no dangerous goods
- THERMOCON standard pack
- Chamfers for a simplified packing process
- individual temperature ranges possible
